LOOP CONE BACKREST
#169
Loop Cone is a multi-purpose unit. When positioned in the middle of a Loop it becomes a backrest as well as a planter. On its own it becomes a self-contained up- or downward facing planter.
LOOP CONE BACKREST
Facts
Design
AART Designers
Loop Cone was originally created as a backrest for Loop. During the design process Loop Cone became a multifunctional product in its own right.
The final design of Loop Cone works as a backrest, a planter, a table and a seat.
LOOP CONE BACKREST is design protected.
Inspired by
Technical data
TECHNICAL DATA
Material
Rotation moulded polyethylene, 6mm thick, dyed. Moulded in one piece. UV-resistant, stands up to weather, wear and tear. The material is suitable for granulation and recycling. Top plate: High pressure laminate, anthracite w. bracket.
Surfaces and friction
The mould is sandblasted to provide a rough surface to increase friction and minimize slippage on the surface of the final product.
Dimensions
Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Inner volume for e.g. plants: 170L
Top plate: Ø380mm
Combinations
Loop Cone works as a self-contained table or planter or combines with #135 Loop, #137 Loop Arc, and #157 HopOp500.
Mounting
Loop Cone may be filled with water or sand through an integrated pipe or attached to the ground with fittings.
Recycled and ecolabelled*
Recycled version is made from 100% recycled polyethylene plastic, of which 85% comes from internal waste and production surplus, while 15% comes from. polyethylene bags.
Recycled version is ecolabelled, promoting circular economy and fulfils UN’s sustainable development goal no.12 – Responsible consumption and production.
Recycled version is available in anthracite variant, yet colour can vary from order to order.
Maintenance
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar
Family
Loop, Loop Arc, Loop Line, Loop Light, Loop Corner
Design Protection
Registered EU community design /
number 0014369920003
Tender
Backrest for Loop. Positioned in the middle of a Loop it becomes a backrest as well as a planter.
Material: Rotation moulded polyethylene, 6mm thick, dyed.
Dimensions: Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Fixation: Fill with water/sand through integrated plugs or surface fixation. Brackets to be ordred separately.
Product code
169 0101 Loop Cone red / 26kg
169 0102 Loop Cone limegreen / 26kg
169 0103 Loop Cone orange / 26kg
169 0104 Loop Cone yellow / 26kg
169 0109 Loop Cone purple / 26kg
169 0111 Loop Cone sandstone / 26kg
169 0113 Loop Cone grey / 26kg
169 0117 Loop Cone blue/ 26kg
169 0115 Loop Cone pastel blue / 26kg
169 0116 Loop Cone mokka brown / 26kg
169 0118 Loop Cone olive green / 26kg
169 0150 Loop Cone white / 26kg
169 0120 Loop Cone recycled anthracite / 26kg
180 0108 Top plate anthracite HPL ø380
B13 Connection and fixation bracket for Loop Cone
Standard colours
(approx. RAL)
Red: RAL 3020
Orange: RAL 2003
Limegreen: RAL 120 70 60
Variant colours
(approx. RAL)
Yellow: RAL 1018
Purple: RAL 4004
Sandstone
Grey: RAL 7015
Blue: RAL 5010
Pastel blue: RAL 5024
Mokka brown: RAL 8028
Olive green: RAL 6025
White: RAL 9003
Recycled: Anthracite*
