Rotation moulded polyethene, 6mm thick, dyed. Moulded in one piece. UV-resistant stands up to weather, wear and tear. The material is suitable for granulation and recycling.
Surfaces and friction
The mould is sandblasted to provide a rough surface to increase friction and minimize slippage on the surface of the final product.
TÜV approved as playground equipment acc. EN1176.
One module: L1400xB1400mmxH400mm, width (cross section): 400mm. Volume: 250 litres. 3-4 seats inside / 4-5 seats outside.
Form Loop Corner like an ”O” (square, 4 modules), like a “C” (2 modules), or like a “S” (2 or more modules). Also combine Loop Corner with Loop Line and Loop Arc.
Armrests can be placed between the modules.
Material: Stainless steel, glass-blown
Also works as a mounting bracket. Therefore, B4 mounting brackets can be omitted when armrests are used. Dimensions can be found under "dimensions" in download.
Assembling & fixation
The modules are joined with brackets (B4) at either end. Fill them with water (160 litres) / sand (265 kg) or fasten them to the ground. Brackets to be ordered separately.
Recycled and eco-labelled*
The recycled version is made from 100% recycled polyethene plastic, of which 85% comes from internal waste and producer surplus, while 15% comes from. polyethene bags.
The recycled version is eco-labelled, promoting a circular economy fulfilling the UN’s sustainable development goal no.12 – Responsible consumption and production.
The recycled version is available in an anthracite variant, yet colour can vary from order to order.
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar.
Loop, Loop Light, Loop Arc, Loop Line, Loop Cone
Registered EU community design /