Rotation moulded polyethylene, 6-7 mm thick, dyed. Moulded in one piece. UV-resistant, stands up to weather, wear and tear. The material is suitable for granulation and recycling.
Surfaces and friction
The products have a textured/granulated surface due to abrasive blasting of the mold. This process enhances the friction and makes the surface less slippery.
TÜV approved as playground equipment acc. EN1176.
Outside diameter Ø1800mm. Inside diameter Ø1000mm. H400mm. Volume: 540L. 4-6 seats inside / 6-8 seats outside. In the centre playground for 1-2 children.
Fill with water (250 litres) / sand (250kg) through integrated plugs or surface/ground fixation. Brackets to be ordred separately.
Possibility of individually molded logo/name on the side of the product.
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar
Loop Arc, Loop Line, Loop Light, Loop Cone, Loop Corner
Registered EU community design /
135 1001 Loop red / 37kg
135 1002 Loop limegreen / 37kg
135 1003 Loop orange / 37kg
135 1004 Loop yellow / 37kg
135 1009 Loop purple / 37kg
135 1011 Loop sandstone / 37kg
135 1013 Loop grey / 37kg
135 1017 Loop blue / 37kg
135 1015 Loop pastel blue / 37kg
135 1016 Loop mokka brown / 37kg
135 1018 Loop Olive green / 37kg
135 1050 Loop white / 37kg
135 1020 Loop recycled anthracite / 37kg
900B2 Brackets for ground fixation
900B3 Brackets for surface fixation